Feature
LED Type: 3*XML T6 LED
Max output: 6000LM
Beam: Mirror Reflector for focused beam
Lens: Anti-shattering ultra clear lens, anti-scratching and anti-slip
Finish: HA II
Waterproof: IPX7
Modes: High-Mid-LOW-Flash
Size: 49mm*74mm*41mm

Specification:

Output XM-L U2 white 2/3LED bright can come to 3500lum
Battery：4×18650 battery pack
Circuit：Digital CC circuit, power indicator system, Low-voltage alarming system.
3 Mode：Low-Mid-High
Dimming：Electronic pushbutton switch
Runtime: (5000/6400mah) 1h40min -2h40min
Material: Aluminum alloy
Lens: Impact-resistant optical lens with AR coating
Reflector: Metal reflector
Waterproof: IPX-7, unable to support dive use.
Mark: LED and mode are optional on your preference.
Internal wiring applies the high efficient booster circuit, working voltage is wide and can utilize the batteries in the largest extent.
Waterproofing design.
Aluminum alloy structure with wear-resistant anodized finish, deep heat sink finish.
High-performance electronic switch
Slightly click the switch to turn ON/Off the light.
Slightly click the switch to change the brightness modes, Low-Mid-high-Strobe.
Long-press the switch for more than one second to access strobe mode.
Power indicator system:
Power > 80%.. three indicating LED on.
50%< Power < 80% , two indicating LED on.
100v-240v Battery Charger. ( LED indication for Power On / Charging / Full charge )
Model of Battery required: 1 x 8.4v 6400mAh Battery Pack

Notes:
Be careful using the maximum brightness setting when riding into oncoming traffic as it's blinding.
Stick to using the maximum output when off roading, it's much safer to other road users.
Please disconnect the connector when not in use.